How Many Concrete Pump Pipes Fit in a Container? Loading Maths and Freight per Metre
News Details
Freight per tonne tells you what the container costs. It does not tell you what the pipe costs to move, because pipe is bought by the metre and shipped by the container. Two suppliers can quote the same FOB price per piece, load different quantities into the same box, and deliver two very different landed costs per metre of delivery line.
This is arithmetic any buyer can do before ordering, and it changes decisions: which wall thickness to specify, whether to buy 3 m or 6 m lengths, whether an LCL shipment is a saving or a trap, and whether the apparent saving on a thinner pipe survives the freight.
Two limits, not one
A container is constrained by internal length and by payload. For steel pipe, either can bind, and which one binds depends on wall thickness.
| Container | Internal length | Internal width / height | Typical payload |
|---|---|---|---|
| 20 ft GP | 5.90 m | 2.35 m / 2.39 m | about 28 t |
| 40 ft GP | 12.03 m | 2.35 m / 2.39 m | about 26–28 t |
| 40 ft HQ | 12.03 m | 2.35 m / 2.69 m | about 26 t |
These are nominal figures. Actual payload depends on the carrier, the road weight limit in the origin and destination countries, and the tare weight of the specific box. On many trade lanes the road limit, not the vessel, is what stops you at 24 or 25 tonnes.
The length rule decides the container size
Three-metre pipe fits a 20 ft container with four rows along the length. Six-metre pipe does not: the internal length is 5.90 m, and the door opening is smaller still. Six-metre pipe needs a 40 ft box, where two rows of 6 m consume 12 of the 12.03 m available. That leaves almost nothing for packing material, dunnage or the slight oversize that comes with a welded collar.
This is why a quotation for 6 m pipe is never a simple multiple of the 3 m price. The container utilisation per metre is worse, the handling is harder, and the dunnage requirement is higher. If your pipeline design can work with 3 m sections plus a few short sections, you will usually ship more metres per container.
Short sections cut both ways. One-metre and two-metre pipes fill the residual length that a row of 3 m sections cannot use, which improves utilisation, but they also add end-to-end joints and therefore more clamps. The guide to custom pipe lengths explains how short sections are used to hit a target line length without wasting container space.
The weight rule decides the quantity
A 3 m DN125 pipe with a 4.5 mm wall weighs about 46 kg. The same pipe with a 7 mm wall weighs about 72 kg. That difference does not sound consequential until it is multiplied by a container load.
| 3 m DN125 pipe | Approx. weight per piece | 500 pieces weigh | What limits the load |
|---|---|---|---|
| 4.5 mm wall | 46 kg | about 23 t | Space |
| 7 mm wall | about 72 kg | about 36 t | Weight |
| Twin-wall 4.5 + 3 mm | about 76 kg | about 38 t | Weight |
The practical result: with 4.5 mm wall you will load around 500 pieces in a 40 ft container before you run out of room. With 7 mm wall the same box runs out of payload at roughly 330 to 360 pieces, well before it is full. The heavy pipe costs more per metre to ship even at an identical freight rate, because you are moving fewer metres for the same container price.
Commonly quoted loading figures for bulk 3 m DN125 pipe sit in the range of 200–270 pieces in a 20 ft container and 500–550 pieces in a 40 ft container. Treat those as a starting point for a thin-wall product, and recalculate for your own wall thickness rather than assuming them.
Freight cost per metre, worked through
Once you have a piece count, the arithmetic is short. Take the all-in container cost, divide by the number of metres loaded.
An illustration, not a quotation: a 40 ft container costing USD 1,800, loaded with 500 pieces of 3 m pipe, carries 1,500 m. That is USD 1.20 per metre. The same container loaded with 340 pieces of 7 mm pipe carries 1,020 m, which is USD 1.76 per metre. The second pipe costs almost 50 per cent more to move, per metre, on an identical freight rate.
Run the same arithmetic on a 20 ft container and the per-metre figure usually rises, because the fixed costs of booking, documentation and port handling are spread over fewer metres. A 20 ft box is a sensible choice when you need a mixed order or a trial shipment. It is rarely the cheapest way to move bulk straight pipe.
Where the mixed order changes the maths
Most real orders are not a single product. A distributor buying pipe, elbows, reducers and clamps in one shipment has a payload problem in the opposite direction: elbows and clamps are dense and compact, and they can fill the weight allowance while the container is still half empty.
The right approach is to load the container by weight and by length at the same time. Straight pipe defines the length utilisation. Elbows, reducers and clamps fill the residual payload and the residual volume. A supplier who quotes a mixed order as separate line items without a loading plan is not giving you a landed cost; they are giving you a price list. Ask for a loading plan showing pieces per row, gross weight per package and total container utilisation. The packaging and shipping guide describes how bundles, iron frames and mixed packages are normally arranged.
Bundles, iron frames and the LCL trap
Pipe is normally bundled at ten pieces per bundle. A 20 ft container holds around 24 bundles and a 40 ft around 50. For orders below roughly 100 pieces, an iron frame is often used instead, because loose bundles do not survive LCL consolidation well.
LCL is charged on whichever is greater, weight or volume, converted to a revenue ton. Steel pipe is heavy, so the charge almost always falls on weight, and LCL also adds a second handling cycle at a consolidation warehouse. For straight pipe, LCL usually stops making sense well before the volume justifies a 20 ft container. It remains useful for clamps, seals and small fittings, which are light and easy to consolidate.
What to ask before confirming
- Pieces per container at the exact wall thickness you are ordering, not at a generic figure
- Gross weight per bundle and per container
- Whether the supplier loads at the factory or delivers to a consolidation warehouse
- Dunnage and end protection included, and at what cost
- Whether the destination road weight limit is lower than the container payload
Hongchang Machinery produces quenched straight pipe in single-layer and double-layer constructions, so the same nominal diameter comes in several weights. The quenched wear-resistant pipe page lists wall thickness and design life for each variant, and the price guide explains how wall thickness and structure change unit cost. Combining the two gives a cost per metre delivered, which is the only figure worth comparing between suppliers.
Send the diameters, wall thicknesses, lengths and destination port, and the reply can state a realistic loading quantity and the freight per metre at that specification.