Blogs /
The Pump Pipe RFQ Sheet: 12 Fields That Prevent a Wrong Order The single most common cause of pump pipe replacement errors is not poor welding or wrong material. It is an incomplete RFQ. A customer asks for “10 m suction pipe.” Without wall thickness, flange rating, or liquid temperature, the supplier quotes something — and the result is either a pipe that cannot handle pressure, a flange that leaks, or a delivery that arrives two weeks late. A well-designed pump pipe RFQ sheet removes this risk by forcing clarity before any quote is given. In pump system engineering, a structured RFQ sheet is the difference between a smooth install and a costly rework job. Below are the 12 fields every pump pipe RFQ sheet must contain. --- 1. Pipe Size and Schedule Start with nominal diameter. Specify DN (European) or NPS (American) as required — for example, DN100 or 4-inch. Equally important is the wall thickness schedule. Schedule 40 and Schedule 80 are common, but high-pressure systems may require Schedule 160. Never omit this. A DN100 Schedule 40 pipe and DN100 Schedule 80 pipe have the same bore name but completely different pressure capacity. --- 2. Material Grade Which metal is the pipe made of? Common choices include: · SS304 for general water and weak corrosive

The Pump Pipe RFQ Sheet: 12 Fields That Prevent a Wrong Order The single most common cause of pump pipe replacement errors is not poor welding or wrong material. It is an incomplete RFQ. A customer asks for “10 m suction pipe.” Without wall thickness, flange rating, or liquid temperature, the supplier quotes something — and the result is either a pipe that cannot handle pressure, a flange that leaks, or a delivery that arrives two weeks late. A well-designed pump pipe RFQ sheet removes this risk by forcing clarity before any quote is given. In pump system engineering, a structured RFQ sheet is the difference between a smooth install and a costly rework job. Below are the 12 fields every pump pipe RFQ sheet must contain. --- 1. Pipe Size and Schedule Start with nominal diameter. Specify DN (European) or NPS (American) as required — for example, DN100 or 4-inch. Equally important is the wall thickness schedule. Schedule 40 and Schedule 80 are common, but high-pressure systems may require Schedule 160. Never omit this. A DN100 Schedule 40 pipe and DN100 Schedule 80 pipe have the same bore name but completely different pressure capacity. --- 2. Material Grade Which metal is the pipe made of? Common choices include: · SS304 for general water and weak corrosive

A DN125 pipe quotation that says only '3 metre, 500 pieces' leaves eight unknowns, and any one of them can stop the container from fitting. The twelve fields to send for straight pipe, elbows, reducers and clamps, with the measurements and documents that prevent a wrong order.

News Details

"DN125, 3 metres, 500 pieces, please quote." That inquiry will receive a reply within a day, and there is a reasonable chance that the container will contain something the buyer cannot use.

Conveying parts for concrete are not interchangeable at the nominal diameter level. Two DN125 pipes may differ in outer diameter, wall thickness, collar profile, steel grade, hardness depth and pressure class, and any one of those differences can prevent the pipe from connecting to an existing line or alter what it can safely pump. The RFQ is the only place where all of these can be set, and it costs one page.

This is the list of fields to send, whether you are buying straight pipe, elbows, reducers or clamps. It applies equally to a first trial order and to a repeat container.

The twelve fields

# Field What to write What goes wrong without it
1 Nominal bore DN100 / DN125 / DN150, plus the inch equivalent (4 in / 5 in / 6 in) Metric and imperial naming are used interchangeably in the trade and do not always match exactly
2 Outer diameter Measured OD in mm DN125 low-pressure pipe is commonly around 133 mm OD, high-pressure around 140 mm. Same nominal bore, different pipe.
3 Wall thickness Nominal mm plus the minimum you will accept on goods receipt Affects weight, freight per metre, pressure class and service life simultaneously
4 Length and tolerance Overall length per piece, plus acceptable variation Boom sections are cut to length; a 20 mm shortfall can leave a gap that a clamp cannot close
5 End / collar type Collar profile name, collar OD in mm, and groove width Most common cause of a delivery that does not fit
6 Steel grade ST52, 45Mn2, 55Mn, 20# or the grade from your drawing Cannot be verified later without a stated reference
7 Hardness and depth HRC range on the inner wall, and whether the full wall or a case depth is hardened A high surface value on a thin case wears through quickly
8 Pressure class Working pressure in bar, test pressure, and safety factor Standard and heavy-duty lines differ substantially; a mismatch is a safety issue, not a cost issue
9 Application location Boom, deck line, vertical riser, ground line, or depot stock Wear rate and pressure requirements vary by location; one grade for the entire line is usually wrong somewhere
10 Quantity and packing Pieces per size, bundle or steel frame, labelling, and whether mixed SKUs are allowed in one container Affects loading quantity and therefore freight per metre
11 Documentation Mill certificate, hardness report, dimensional inspection record, packing list with heat numbers Needed for customs, warranty claims and your own records
12 Destination and Incoterm Port, country, and FOB / CIF / CFR Without it, a "price" is not comparable between suppliers

Field 5 is where orders actually fail

Nominal bore is easy. The end connection is not. Concrete pump lines use several collar families, and they are not interchangeable without an adapter.

The collar profiles most frequently quoted in the trade carry a nominal diameter: SK at around 148 mm, HD at around 157 mm, MF at around 166 mm and ZX at around 175 mm. These figures are a starting point for identification, not a specification. What a supplier needs is the collar outer diameter measured on the pipe you are replacing, the groove width where the clamp sits, and the face profile. A photograph of the end with a ruler next to it resolves most ambiguities in one image.

Two rules save most of the trouble. Send a sample end or the measurements taken from it, rather than just the machine brand and model. And when the order includes clamps, order them from the same source as the pipe ends, so the groove and clamp are matched by the party that machined them. The pipe clamp range covers cast and wedge types for common bore sizes.

Elbows need four fields, not two

An elbow inquiry that only states "DN125, 90 degree" leaves out the two dimensions that determine whether it fits: centreline radius and leg length.

  • Angle in degrees, measured on the centreline
  • Centreline radius in mm, for example R275, R500 or R1000. A larger radius guides the concrete more gradually and reduces impact wear on the outer curve, but takes up more space in the boom.
  • Leg length from the centreline intersection to each end face
  • End type, matching the straight pipe in the same line

Radius is also where suppliers make substitutions. A quoted elbow with the right angle and bore but a shorter radius will fit the space and wear faster. The elbow product page lists angle, radius and structure for the trailer pump range, which is the level of detail to include in your RFQ.

Reducers and clamps

A reducing pipe needs the large-end diameter, the small-end diameter, the overall length, and whether the transition is forged or fabricated. A forged transition with a smooth internal curve pumps with less resistance than a fabricated cone with a step, and the difference shows up as local wear and blockage risk at the small end. Length is not cosmetic: a short reducer concentrates the change in cross-section over a few centimetres. The reducing pipe page shows how the transition is formed.

A clamp needs the pipe outer diameter it closes on, the pressure class of the line, the material and forming process (cast or forged), and the locking method (bolt or wedge). A wedge clamp is faster to install and requires no tools; a bolted clamp tolerates different tightening practices. Neither is universally better, but the two should not be mixed on one line without reason.

A copy-ready RFQ block

The fastest way to avoid a round of clarification emails is to paste a block like this into the inquiry and fill in the blanks.

  • Product: straight pipe / elbow / reducer / clamp
  • Bore and inch size: DN___ / ___ in
  • Outer diameter: ___ mm
  • Wall thickness: nominal ___ mm, minimum accepted ___ mm
  • Length: ___ mm, tolerance ___ mm
  • Collar: profile ___ , collar OD ___ mm, groove width ___ mm
  • Steel grade: ___ ; inner wall hardness: ___ HRC
  • Required working pressure: ___ bar
  • Position in line: boom / deck / riser / ground
  • Quantity: ___ pieces; packing: bundle / steel frame
  • Documentation required: ___
  • Destination port: ___ ; Incoterm: ___

Attach one photograph of the end you are matching, and one of the entire component if it is an elbow or reducer. Two images and twelve lines will produce a quotation you can compare with another supplier's, which is the actual purpose of the document.

Before the first container

For a new supplier relationship, a trial order is worth more than a longer negotiation. Order a small set to the exact specification, install it on one unit, and measure wall thickness at both ends before it goes into service. That single action gives you a wear baseline, a fit check, and a document you can use later in a warranty discussion. The specification guide covers pressure classes and wall thickness selection in more depth, and the custom length guide explains how to specify non-standard dimensions so they can be produced without a second drawing round.

Hongchang Machinery produces hardened straight pipe, cast and double-layer elbows, forged reducers and cast or wedge clamps, and provides quotes based on a written specification rather than nominal diameter. Send the completed block above along with your drawings or end photographs, and the reply will state the exact specification, loading quantity and documentation that apply to your order.

Share to:
facebook
line
Whatsapp
Pinterest
Tumblr
Linkedin